black and blonde hair color ideas

Blonde and black hair is a striking combination because of the stark contrast between the two color ideas. When done properly, the look is interesting and garners plenty of attention. With this combination, you have the option of dyeing one color into the under-layers of your hair or perhaps streaking it throughout the entire length, giving you a lot of artistic licenses to individualize your hair color to your own style.

How Can It Be Done?

You have a few different options when it comes to black and blonde hair. You can opt to wear black hair as the base and add interest by dyeing blonde under-layers into the back of your hair or framing your own knee. Or you can reverse the colors and dye black layers into your blond hair. You can even add streaks of either color through your fringe or whole head.

black and blonde hair color ideas
black and blonde hair color ideas

The process of dyeing black and blonde hair depends on what look you are going for. 

So as to prepare for the dyeing process, you need to answer the next two questions:

Do you need black or blonde hair as the base color?

Do you need to bring the other color as stripes or under-layers?

Even if you would like to streak your hair around, you will still have to choose a base color before you can add the stripes. 

Quite simply, if you're already blonde, your foundation color will be blonde and you will add black segments to your blond hair to simplify the procedure. 

If you've got dark hair, it makes more sense to use black as a base rather than lightening all your hair. You may lighten just the parts that you need to be blonde and the procedure will be simpler and far less damaging.

Adding Blonde to Black Hair

If your hair is already black, then you can add blonde sections wherever you need by either isolating parts of your hair or apply foiled highlights. 

If you want to dye the under-layers of either your fringe, sides or back of the hair, all you need to do is a section the rest of your hair and apply bleach to just the under-layers that you wish to lighten. 

If you would like streaked black and blonde hair, however, you will need to use foils to lighten the stripes without affecting the rest of your hair.

Lightening Blonde Under-Layers

To dye blond under-layers into your black hair, you will need to begin by deciding where you want to place the layers and how thick you want them to be. 

Thinner under-layers are less noticeable depending on how you style your hair, whilst thicker layers will result in an extremely contrasted effect because more of the blonde color will be visible.

As soon as you have decided where to place the under-layers, begin by sectioning up the rest of your hair. In the event that you were dyeing the under-layers in the back of your mind, section up your hair all except the layers at the base of your head. 

These layers will have to be bleached in order to lighten them to blond, and it may take more than once bleach to attain a blonde color. Usually, black hair will need at least two processes.

Use the bleach into your under-layers from root to tip, taking care not to apply any to the pinned-up layers. 

After you've applied the bleach, you'll need to leave it in for an hour before rinsing out the product. To tone these layers to blonde they need to accomplish the yellow stage, and if they're orange rather than yellow, bleach them another time.

If your hair does require another bleaching to accomplish the yellow stage, you need to allow it to rest for at least a week until you bleach it again. 

This permits natural oils to build up again and condition the hair, relieving the dryness that the bleach has caused. If you bleach twice in the same day, you increase the chances of damaging your hair.

Toning Under-Layers

Now that you've lightened the sections of hair that you need to be blonde, the next step is to tone the hair so that it becomes a natural blonde color. To do so, your hair has to have attained the yellow stage or at least be light orange.

To tone your sections to blonde, apply an ash blonde dye. As before, take care to only apply this color to your blonde sections or you may discolor your black hair

The hair you are not working with should be trapped from the way to avoid inadvertently applying the ash blonde dye to it.

This dye will have to be left to process until your hair tones into a blonde shade that you're happy with. 

Should you prefer more of a silver or ash blonde, then you can leave the color in for more, whilst if you prefer a warmer blonde, you can rinse it out as soon as it takes the edge off the yellowish tone.

Highlighting Black Hair

If you want streaked black and blonde hair, this is much more difficult when your starting color is black. 

Because black hair usually has to be bleached at least twice before it can reach a blond color, and because highlighted streaks are notoriously difficult to highlight double, you may prefer to ditch the idea.

Dyeing blonde streaks into black hair require you to meticulously section out the previously highlighted hair. 

This often needs to be achieved strand by strand if you want a really clean color. 

The problem with highlights is that they take weaved sections of hair and you'll need to separate all of this highlighted hair again if you would like to bleach it more than once.

Read too :black african hair

If you have naturally black hair, you are less likely to run into problems, provided that you use a quality salon bleach like Igora Vario that could lift up to 8 degrees in one process. 

Hair that's been dyed black will never lighten that much in a single procedure, though.

To apply highlights to a section of hair, you require a tail comb. Take a thin layer of hair, weave through it with the tail of your comb, and clip the rest of the hair from your layer back. 

The weave of hair you choose should be pretty thick or else the blonde color will blend into the black and make your hair appear brown rather than highlighted.

The tail of this comb is then placed against a foil strip, about an inch from the surface, and you place the tail directly from the scalp below the weaved hair.

This folds the foil under as the comb's tail presses against your scalp, and the bleach needs to be applied by brush whilst holding the foil in place. Once the weaved hair is wet and sticks to the foil, you can remove the tail of your comb from the foil by sliding it out, then fold up the foil once. This gives you neat, tight, square foils that don't leak or fall out of the hair.

As soon as you have foiled one section, take another coating and this time clip it up from the foil. Continue in this fashion to run as much of your hair as you want. 

You can streak your fringe or the sides of your hair, or perhaps streak your hair all over if you would like.

If your hair hasn't lightened enough after the initial bleach and you're still adamant you want to continue with the procedure, you want to replicate the foiling measure, but this time rather than weaving sections out, you are using the tail of your comb to separate each of the highlighted streaks and foil them again. It's an arduous process and takes a lot of time but it can be done if you're patient.

Adding Black to Blonde Hair

If your hair is already blond, you will have a fairly simple time adding black to your hair to create a black and blonde hair color. You may either add streaks by foiling your hair or dye the under-layers of your hair black.

To dye the under-layers of your blonde hair black, the procedure is exactly the same as if you had black hair, except in this case you won't be combing your hair first. 

You'll need to employ black hair dye to your under-layers, taking the utmost of care not to slip and apply any color to your pinned up blonde hair. Once applied, leave this to procedure until the dye develops and rinse it out to unveil your new blonde and black hair.

If you want to streak your blonde hair with black, the procedure is also exactly the same as streaking black hair, except this time it's really realistic and quick to attain. 

You can apply foils following the exact instructions, using black hair dye instead of bleach to foil your own hair. You want to be extremely careful that your foils do not leak or slip or you will end up getting a disaster. 

Black dye takes to blond hair very rapidly and any foiling error will result in problems for the rest of your color.

When you rinse these foils out, you'll also need to be very fast and cautious as the rinse water can dye the rest of your blonde hair. You should be holding the foiled layer perpendicular to your hair and hold your head downwards so that the rinse water runs off from your hair as opposed to into the rest of your hair.

Dyeing Brown Hair

If your hair is neither black nor blonde, it takes an extra step to achieve black and blonde hair since you don't have one of these colors already. 

For this procedure, if you are dyeing your under-layers blonde, you will have to foil them with bleach, whilst dyeing the rest of your hair with black hair dye. The black hair dye will need to be rinsed out first before you pull the bleach out. 

To reverse the process, apply black foils to your under-layers and bleach into the rest of your hair. In this case, the black dyed foils will have to be rinsed first so that they don't bleed into your new blonde hair.

Additionally, it is possible to achieve streaked black and blonde hair starting from a brownish hair color. 

To do that you will need to highlight part of your hair with bleach foils, and lowlight the rest with black dye foils. 

The color that's the base should be the most abundant, whilst the accent color needs to be more sparse. This is not something to attempt if you are not skilled with foiling or streaking hair though.

Color Maintenance

Black and blonde hair will need maintenance just like any other hair color. You have two major problems to deal with here, and which will be the fading of your black hair and brassiness in blond hair.

To prevent brassiness, switch out your normal shampoo to get a purple shampoo. The purple shampoo will wash your black hair just like any other shampoo, but your blond hair will also be toned by the shampoo so that it doesn't become too brassy.

Read too :american short hair

In terms of fading that occurs on your black hair, you can't avoid this too much other than to avoid shampooing your hair too often, using cooler water to wash your hair and avoiding the excess sun. 

When it fades to the point that it's beginning to look brown rather than black, section it out again and employ black hair dye to refresh your color and take it back to black.

Provided that you care for your black and blond hair, you can wear this exciting and interesting hair color for a long time without worry.

Do you have a question about black and blonde hair? Leave a comment for tailored advice and share your insight with other readers.

0 comments for black and blonde hair color ideas